Occurrence and diversity of Listeria spp. in seafood processing plant environments

Listeria contamination in processing plant environments is a major issue for the seafood industry worldwide; faster and more reliable results are therefore desired for early detection and monitoring of environmental Listeria spp. This study aimed to gain a better understanding of the prevalence and diversity of Listeria spp., and to evaluate a rapid detection method, the 3M Molecular Detection Assay (MDA) Listeria, for its ability to detect Listeria spp. in environmental samples from seafood processing plants. Duplicate environmental sponge samples (n = 444) were collected from 152 different sites within three seafood processing plants, and analyzed for Listeria spp. by the MDA method (after 26 and 48 h of enrichment) and the U.S. Food and Drug Administration Bacteriological Analytical Manual method. Overall, detection of Listeria spp. by the two methods did not differ significantly (p > 0.05); 11 (4.9%) and 13 (5.9%) samples were positive for Listeria spp. by the MDA and FDA-BAM method, respectively. The sensitivity of the MDS was 87.0% (95% CI: 77.4–96.6%), specificity was 97.6% (95% CI: 95.5–99.7%), accuracy was 95.3%, and the positive predictive value was 89.4% (95% CI: 80.5–98.2%). Classification of 19 Listeria isolates by partial SigB sequencing analysis identified three allelic types. Twelve of these isolates were ATs 58 and 60 which were classified as Listeria monocytogenes lineage I and serotypes 1/2b, 3b, 4b, 4d, 4e, by multiplex-PCR serotyping. Six Listeria isolates were classified as Listeria innocua (AT31). Our data show that the 3M Molecular Detection Assay Listeria provides rapid and reliable results for detection and monitoring of Listeria spp., which are important for seafood processing plants. Effective Listeria monitoring programs will allow for improved development of Listeria control measures in order to minimize cross-contamination in finished products.     

Graph-based video fingerprinting using double optimal projection

A double optimal projection method that involves projections for intra-cluster and inter-cluster dimensionality reduction are proposed for video fingerprinting. The video is initially set as a graph with frames as its vertices in a high-dimensional space. A similarity measure that can compute the weights of the edges is then proposed. Subsequently, the video frames are partitioned into different clusters based on the graph model. Double optimal projection is used to explore the optimal mapping points in a low-dimensional space to reduce the video dimensions. The statistics and geometrical fingerprints are generated to determine whether a query video is copied from one of the videos in the database. During matching, the video can be roughly matched by utilizing the statistics fingerprint. Further matching is thereafter performed in the corresponding group using geometrical fingerprints. Experimental results show the good performance of the proposed video fingerprinting method in robustness and discrimination.     

Random-valued impulse noise removal using adaptive dual threshold median filter

Noise detection and its removal is very important in the image processing. Detection of noise is very crucial and significant in random valued impulse noise because it does not hamper the image pixels uniformly. This paper presents a novel and unique concept of adaptive dual threshold for the detection of random valued impulse noise along with simple median filter at noise removal stage. Simulation results shows that an efficient noise detection leads to a superior quality of de-noised image as compared to existing adaptive threshold based image de-noising techniques. Proposed threshold computation is based on averaging of pixel values of window which enhances the PSNR of our system as compared to existing median filter based image de-noising methods.     

Robust skin detection in real-world images

Human skin detection in images is desirable in many practical applications, e.g., human–computer interaction and adult-content filtering. However, existing methods are mainly suffer from confusing backgrounds in real-world images. In this paper, we try to address this issue by exploring and combining several human skin properties, i.e. color property, texture property and region property. First, images are divided into superpixels, and robust skin seeds and background seeds are acquired through color property and texture property of skin. Then we combining color, region and texture properties of skin by proposing a novel skin color and texture based graph cuts (SCTGC) to acquire the final skin detection results. Comprehensive and comparative experiments show that the proposed method achieves promising performance and outperforms many state-of-the-art methods over publicly available challenging datasets with a great part of hard images.     

碱化插层二维过渡金属碳化物的制备及其对铀酰离子的电化学检测

二维过渡金属碳化物(MXenes)具有良好的电化学性能与辐照稳定性, 其在放射性核素电化学检测领域有潜在应用价值。本研究通过碱活化的方式处理碳化钛型MXene(Ti₃C₂T_x), 随后将钾插层的Ti₃C₂T_x(K-Ti₃C₂T_x)负载到玻碳电极(GCE)上得到K-Ti₃C₂T_x/GCE修饰电极。采用XRD、SEM、XPS等手段分别对Ti₃C₂T_x和K-Ti₃C₂T_x进行分析表征, 并进一步研究了K-Ti₃C₂T_x/GCE对痕量铀酰离子(UO₂²⁺)的电化学检测性能。循环伏安(CV)实验结果表明, 相比于GCE电极, K-Ti₃C₂T_x/GCE修饰电极对UO₂²⁺的电化学响应显著增强。进一步使用差分脉冲伏安法(DPV)扫描, 发现pH=4.0时, K-Ti₃C₂T_x/GCE修饰电极对UO₂²⁺在铀浓度0.5~10 mg/L范围内呈现良好的线性检测关系, 本方法的检测限为0.083 mg/L(S/N=3), 稳定性和重复性好。     

A novel robot co-worker system for paint factories without the need of existing robotic infrastructure

This paper presents a human–robot co-working system to be applied to industrial tasks such as the production line of a paint factory. The aim is to optimize the picking task with respect to manual operation in a paint factory. The use of an agile autonomous robot co-worker reduces the time in the picking process of materials, and the reduction of the exposure time to raw materials of the worker improves the human safety. Moreover, the process supervision is also improved thanks to a better traceability of the whole process. The whole system consists of a manufacturing process management system, an autonomous navigation system, and a people detection and tracking system. The localization module does not require the installation of reflectors or visual markers for robot operation, significantly simplifying the system deployment in a factory. The robot is able to respond to changing environmental conditions such as people, moving forklifts or unmapped static obstacles like pallets or boxes. The system is not tied to specific manufacturing orders. It is fully integrated with the manufacturing process management system and it can process all possible orders as long as their components are placed into the warehouse. Real experiments to validate the system have been performed in a paint factory by a real holonomic platform and a worker. The results are promising from the evaluation of performance indicators such as exposure time of the worker to raw materials, automation of the process, robust and safe navigation, and the assessment of the end-user.     

Classification and regression models of audio and vibration signals for machine state monitoring in precision machining systems

We present a data-driven method for monitoring machine status in manufacturing processes. Audio and vibration data from precision machining are used for inference in two operating scenarios: (a) variable machine health states (anomaly detection); and (b) settings of machine operation (state estimation). Audio and vibration signals are first processed through Fast Fourier Transform and Principal Component Analysis to extract transformed and informative features. These features are then used in the training of classification and regression models for machine state monitoring. Specifically, three classifiers (K-nearest neighbors, convolutional neural networks and support vector machines) and two regressors (support vector regression and neural network regression) were explored, in terms of their accuracy in machine state prediction. It is shown that the audio and vibration signals are sufficiently rich in information about the machine that 100% state classification accuracy could be accomplished. Data fusion was also explored, showing overall superior accuracy of data-driven regression models.     

多分量数据全波形反演在气藏检测中的关键问题——以苏里格气田为例

苏里格气田是中国典型的致密砂岩气藏，构造简单、平缓，横向非均质性强，有效储层与围岩声学特征差别小，地震响应不明显，常规地震监测方法预测难度大，但气田含气砂岩泊松比低，是地震气藏检测的有效参数。利用弹性全波形反演精度高和能处理复杂非均质介质的优势，反演地层拉梅常数、剪切模量和密度，并计算泊松比，从而进行气藏预测。重点阐述了苏里格气田多分量数据全波形反演初始模型建模、先验模型建模和地震数据预处理3个关键问题的处理方法。二维三分量数据反演和"甜点"预测结果表明：①对于具有强非均质性的苏里格气田，利用全波形反演获得精度较高的地层弹性参数能显著提高气藏预测的准确度；②苏里格地区构造简单、平缓，利用常规叠加速度并结合构造解释可以建立比较好的初始模型，从而有效地解决了周波跳跃和局部极小的难题；③先验知识的约束和地震数据的预处理是全波形反演成功应用于苏里格气田气藏检测的关键。     

Adaptive GLR-, Rao- and Wald-based CFAR detectors for a subspace signal embedded in structured Gaussian interference

The problem of detecting a subspace signal embedded in subspace Gaussian interference and thermal noise is studied in this paper. In this problem, both the signal-independent and signal-dependent interferences are assumed to be present, therefore the overall interference subspace covers the signal subspace. The approach of this paper extends previous works involving either of those two kinds of interferences. A set of secondary data containing only interference plus noise is employed to estimate the interference covariance matrix and the noise power. Three new detectors are designed via the generalized likelihood ratio (GLR), Rao and Wald tests, respectively. Their probabilities of false alarms (PFAs) and detections are analytically derived. The PFAs show that the new detectors have the constant false alarm rate (CFAR) property against the interference and noise. Numerical results show that the new detectors outperform their counterparts for the studied problem. Furthermore, the new detectors are less sensitive to the secondary data size and to the mismatched subspace signal than some other detectors, such as the GLR detector (GLRD), the adaptive matched filter (AMF), the adaptive subspace detector (ASD), etc.